Dell OptiPlex 330 Handleiding pagina 60
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Light Pattern
Clearing Forgotten Passwords
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 10.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 43).
3 Locate the 2-pin password jumper (PSWD) on the system board. By
default, Pin1 and Pin2 should be connected. You will need to remove the
jumper and boot the system, as follows.
4 Remove the jumper.
60
Quick Reference Guide
Problem Description
A failure has occurred.
This pattern also displays when
you enter system setup and
may not indicate a problem.
After POST is complete, all
four diagnostic lights turn
green briefly before turning off
to indicate normal operating
condition.
Suggested Resolution
• Ensure that the cables are
properly connected to the
system board from the hard
drive and the optical drive.
• Check the computer
message that appears on
your monitor screen.
• If the problem persists,
Contact Dell.
None.
