Using The Chlorinator - Bestway 58773 Gebruikershandleiding
Chlorinator
Inhoudsopgave
Beschikbare talen
Beschikbare talen
USING THE CHLORINATOR
Standby mode: At the end of the cycle, the display shows "00". At this time, the chlorinator will automatically enter the
standby mode.
The day after, approximately at the same time, it will automatically run again. If you unplug the Chlorinator, connect
the plug the next day, and press the power button, the chlorinator will work according to the working hours set the
previous day.
1. This table shows the recommended working hours for the normal maintenance of the chlorinator connected to the pool.
2. For cleaning the pool, please run it at 1.5-2 times the time shown in the table for the first use, and run it according
to the normal working hours once the chlorine level is reached.
3. On the first use or if the water in the pool is dirty, run the chlorinator until the level of chlorine is correct or the water
is clean. Refer to the working time shown in the table below.
Pool size
Gallon
Liter
500
1893
750
2839
1000
3785
1250
4731
1500
5678
1750
6624
2000
7570
2200
8327
Code
Icon
Name
number
Power
1
button
Timer
2
button
Lock
3
indicator
4
concentration
indicator
Water flow
5
NO FLOW
status indicator
Digital Display
6
Recommended Pool Working Time Set Table
Working time (hours) under different ambient temperatures
10 - 19°C (50 - 66°F)
2
3
4
4
5
6
7
8
Press and hold for 3s to turn on/off the chlorinator
Press and hold for 3s to lock/unlock, and press
quickly to adjust working time
When the lock indicator is unlit, the product is
unlocked. If no button is pressed, the product
will automatically lock after 1 minute and the
Lock indicator will turn red.
Red: The salt concentration is too high, part of
the salt should be removed from the pool water.
Salt
Display shows: E2;
Green: The salt concentration is at the optimal level;
Yellow: The salt concentration is too low and salt
needs to be added to the pool water. Display
shows: E1.
Shows red, no water flow or insufficient water flow
Displays running time/remaining time/fault code
Power-on state/standby mode
20 - 28°C (68 - 82°F)
2
3
4
4
5
6
7
8
4
Illustrate
29 - 36°C (84 - 97°F)
2
3
4
5
6
7
8
9
Inhoudsopgave
