Bestway 58773 Gebruikershandleiding pagina 6
Chlorinator
Inhoudsopgave
Beschikbare talen
Beschikbare talen
TROUBLESHOOTING
Problems
• The running time of the product
is not long enough.
• The salt concentration is not
enough (less than 2000 ppm).
Insufficient chlorine
• The electrolytic cell is blocked
concentration
or left with dirt.
• Increase in swimmers.
• Strong exposure to the sun
leads to the emission of chlorine.
Flocculent
• There is too much calcium
precipitation
in the pool water.
in water
LED indicator has
• Not plugged in.
no display code
• The LED indicator fails.
Probable Causes
• Please increase the running time of the product every
day. For details, please refer to "Operation Instructions".
• Adjust the salt concentration by referring to the "Pool
Salt Table".
• If necessary, please disassemble the electrolytic cell for
inspection and cleaning. Please refer to "Maintenance".
• Please increase the running time of the product every
day. When the pool is not in use or the product is
running, please cover the pool cover.
• Please increase the running time of the product every
day. During the running of the product, you can cover
the surface of the pool and wait 2 days before using the
test paper to test.
• Empty about 20%-25% of the pool water volume, then add
clean water to reduce the hardness. If necessary, please
disassemble the electrolytic cell for inspection and cleaning.
• Plug in the power plug.
• Please contact Bestway Customer
Service Center for replacement.
6
Solutions
Inhoudsopgave
