Dosing The Powder - Beaba Milkeo Plus Handleiding
Inhoudsopgave
Beschikbare talen
Beschikbare talen
6. Dosing the powder
Milk powders have different formulations. The settings therefore differ depending on the type of powder.
To find out the setting for your formula milk, please refer to the list available on our website.
Remark: If you change milk, remember to verify the new setting.
Attention: The formulations of baby milk change and we do our utmost to try and keep the list of settings up-to-date.
Please check the settings regularly and contact us if you have a doubt.
7. Bottle preparation function
To prepare a bottle:
- Follow the configuration instructions for the first bottle
- Ensure that the powder level is between MIN and MAX: add or remove powder if necessary
4
- Place the bottle on the bottle stand
- Press the preparation button
to start the preparation
Press any button to stop preparation
8. Hot water function
This function is for dispensing hot water at 22 to 70°
6
The water is dispensed at the quantity and temperature indicated on the control panel
. You can modify these values
in the same way as for bottle preparation
4
- Place a recipient on the bottle stand
- Press the hot water dispenser button
to obtain hot water
- Press any button to stop dispensing manually.
Note: when using the «hot water» function for high temperatures, it is necessary to remove the powder tank beforehand.
9. Pre-clean function
5
The pre-clean function produces hot water to clean the Mixing compartment
4
- Place a recipient able to contain at least 220 ml on the bottle stand
16
Inhoudsopgave
