Beaba MILKEO PLUS Handleiding pagina 21
Inhoudsopgave
Beschikbare talen
Beschikbare talen
- Remove the powder reservoir
- Press the pre-clean button
- Check that there is enough water in the reservoir before starting the cleaning cycle.
- Replace powder reservoir
10. Cleaning
1. If there is water on the surface of the product, wipe with a dry cloth. Be sure to lock the control
panel with the lock button
2. Do not place the product in a humid environment
3. When the product is not used for an extended period, we recommend that you unplug it.
Always clean the Milkeo Plus thoroughly (powder tank, mixing chamber and residue)
before storing it
4. Do not leave powder in the tank for more than 2 weeks.
5. Use a dry cloth and the cleaning brush to wipe the formula tank door at least once a day and
make sure there is no formula leftover or buildup.
• Make sure that you remove the formula tank before using the pre-clean function.
Clean the mixing compartment every 4 bottles or at least once a day with warm soapy
water and rinse well. Ensure it is completely dry before re-installing.
• Clean the formula tank every two weeks with warm soapy water, rinse well and dry thoroughly.
It is extremely important that it is totally dry before putting back formula in the tank.
• Please refer to our website for more care and cleaning guides
Do not use a hard brush, organic abrasive products, or organic solvents to clean the mixing
5
compartment
or switch off the appliance before cleaning the control panel
6
17
Inhoudsopgave
