Stihl AP Handleiding pagina 36
Heuptasje met aansluitkabel
English
16 Troubleshooting
16.1 Troubleshooting the Cordless Product, AP Belt Bag with Connecting Cable and the Battery
Condition
LEDs on battery
and beeps
Cordless product
1 LED flashes
does not run after
green.
switch-on or cuts out
during operation.
1 LED glows red. Battery too hot or too cold. ► Remove the battery.
3 LEDs flash red. There is a malfunction in
3 LEDs glow red. Cordless product too hot.
4 LEDs flash red
and short beeps
sound in quick
succession.
34
All manuals and user guides at all-guides.com
Cause
Battery has low charge.
the battery.
There is a malfunction in
the battery.
No electrical contact
between cordless product
and battery.
Cordless product or battery
damp.
Remedy
► Recharge the battery fully as described in the
instruction manual for the STIHL AL 101, 300, 500
chargers.
► Allow battery to cool down / warm up.
► Remove the battery.
► Clean the electrical contacts in the AP belt bag with
connecting cable.
► Fit the battery.
► Switch on the cordless product.
► If 3 LEDs continue to flash red: Contact a STIHL
servicing dealer for assistance.
► Remove the battery.
► Wait for cordless product to cool down.
► Remove battery and insert it again.
► Switch on the cordless product.
► If 4 LEDs continue to flash red and short beeps
sound in quick succession: Do not use the battery
and contact your STIHL dealer for assistance.
► Remove the battery.
► Clean the electrical contacts in the AP belt bag with
connecting cable.
► Fit the battery.
► If the cordless product still does not run when
switched on or cuts out during operation: Clean
contacts of the connecting cable.
► Allow cordless product / battery to dry.
16 Troubleshooting
0458-728-9621-A
