Graef EK501 Gebruiksaanwijzing pagina 17
Elektrisch mes
for translation mistakes. The original German
text only shall be binding.
AFTER-SALES SERVICE
If your Graef device is damaged, please
contact your dealer or the Graef Customer
Service at +49 (2932) 9703677 or write an
e-mail to service@graef.de.
IMPORTANT!
If possible, keep the original packaging
during the guarantee period of the unit in
order to be able to pack the unit correctly in
case of guarantee.
UNPACKING
When unpacking the unit, proceed as follows:
Remove the unit from the box.
●
Remove the packaging parts.
●
Remove any stickers on the unit. Do not re-
●
move the type plate!
DISPOSAL OF THE PACKAGING
The packaging protects the unit against trans-
port damage. The packaging materials are
selected according to the environmental com-
patibility and disposal-related aspects and
can therefore be recycled.
The return of packaging into the material cy-
cle saves raw material and reduces the waste
volume. Dispose of the packaging material
no longer needed at collection points for the
"Green Dot" recycling system (in Germany).
DISPOSAL OF THE UNIT
At the end of its service life, this product can-
not be disposed of in normal domestic waste.
The symbol on the product and in the operat-
ing instructions point out to this fact. Reuse the
materials according to their marking. With the
reuse, recycling or other forms of recycling of
old equipment, you make an important con-
tribution to the protection of our environment.
Please ask your municipal administration for
the disposal point.
REQUIREMENTS ON THE INSTALLATI-
ON LOCATION
For safe and fault free operation of the unit,
the following requirements of the installation
location have to be met:
The unit has to be placed on a solid, flat,
●
horizontal, and non-slipping surface with a
sufficient weight-carrying capacity.
Make sure that the unit cannot topple over.
●
Choose the location in such a way that
●
children cannot reach the supply line of the
unit.
Do not place the appliance on hot surfac-
●
es, such as hotplates, or near them.
Never use the unit in the open, and store in
●
a dry location.
The unit is not designed for installation in a
●
wall or a built-in cupboard.
Do not set up the unit in a hot, wet or moist
●
environment.
The socket has to be easily accessible so
●
that the power cable can be removed eas-
ily in case of emergency.
ELECTRICAL CONNECTION
For safe and fault-free operation of the unit,
the following requirements have to be met
during the electrical connection:
Before connecting the unit, compare the
●
connecting data (voltage and frequency)
on the type plate with those of your energy
network. These details must correspond so
that no damage occurs to the unit. In case
of uncertainty, contact a qualified electri-
cian.
The socket has to be protected at least by
●
a 10 amps circuit breaker.
Make sure that the power cable is not
●
DE
EN
FR
NL
IT
ES
DK
SE
NO
PL
UKR
HU
17
