Sharp KH-6I35NS0I-FR Gebruikershandleiding pagina 40
Beschikbare talen
Beschikbare talen
Keep-Warm Function
This function allows the temperature of
food to be kept at around 50°C. To activate
the keep-warm function, press the heater
selection button four times. When the
keep-warm function has been activated, the
corresponding display will show 'u'.
The above image shows the front right
heater display indicating the keep-warm
function.
Chocolate-Melting Function
This function melts chocolate or similar
foods at around 40°C. To activate the
chocolate-melting function, press the
heater selection button five times. When
the chocolate-melting function has been
activated, the corresponding display will
show 'c'.
In the image above, the front right heater
display is indicating the chocolate-melting
function.
Performance and time may vary
according to the quantity of food in the
pan and the quality of the pan. 1.5
litres of water or 0.5 litres of oil gives the
best cooking performance with these
functions.
If there is an error, an error code will be shown on
E0
Ampere limit feature must be selected
at the moment the product is energized.
Otherwise E0 error is seen. At the same
time, this feature should be selected on the
display and mainboard. If there is an error
in the software of any card, the product
will show an error. The customer cannot
in this error. Authorized service should be
E1
Cooling Fan is disabled. Call an authorised
E2
This error is seen when the heater gets
too hot. In case of this error, the heater
must be cooled. It should be operated after
E3
Supply voltage is other than the rated
values. Switch the hob off by pressing
,wait until "H" disappears for all zones,
switch the hob on by pressing
continue to use. If the same error is
displayed again, call an authorised service
E4
Supply frequency is different from the rated
values. Switch the hob off by pressing
zones, switch the hob on by pressing
and continue to use. If the same error is
displayed again, switch the plug for the
appliance off and on. Switch the hob on
by pressing
same error is displayed again, call an
E5
Internal temperature of the hob is too high,
switch the hob off by pressing
E6
Communication error between the touch
control and heater. Call an authorised
E7
Coil temperature sensor is disabled. Call
E8
Cooler temperature sensor is disabled. Call
EA
Large Coil Saturation Error. Switch the hob
off by pressing on/off button, switch the hob
on by pressing on/off button and continue
to use. If the same error is displayed again,
EC
Supply Voltage Error.Switch the hob off by
pressing on/off button, switch the hob on by
pressing on/off button and continue to use.
If the same error is displayed again, call an
C1-C8
Microprocessor alert. After this warning,
cut off energy from the product and then
re-energize the product. If the same error is
displayed again, call an authorised service
EN - 18
Error Codes
the heater displays.
interfere
called.
service agent.
cooling, again.
agent.
, wait until "H" disappears from all
and continue to use. If the
authorised service agent.
heaters cool down.
service agent.
an authorized service agent.
an authorized service agent.
call an authorised service agent.
authorised service agent.
agent.
and
and let the
