Parkside PSS 65 D1 Gebruikershandleiding pagina 35
Beschikbare talen
Beschikbare talen
Do not touch the cable before it has
been disconnected from the mains.
Risk of electric shock.
The replacement of the plug or the
cable must be carried out by the
manufacturer or his/her customer
service in order to avoid any hazards.
Only switch the device on once it is
safely fixed to the worktop.
For your own safety only use
accessories and attachments
which were stated in the operating
instructions or recommended or
specified by the tool manufacturer.
Only use grinding wheels where the
printed rotational speed is at least as
high as what has been specified on
the name plate of the device.
Carry out a visual inspection of
the grinding wheel before use. Do
not use any damaged or deformed
grinding wheels. Replace any
damaged or worn grinding wheels.
Make sure that the sparks produced
by grinding do not present a danger,
e.g. reach people or ignite flammable
substances.
Never keep the fingers between the
grinding wheel and spark protection
or in close proximity to the protective
hoods. There is a risk of crushing.
The rotating parts of the device
cannot be covered due to functional
reasons. Therefore, proceed
cautiously and hold the workpiece
firmly in order to avoid slipping which
could cause your hands to come
into contact with the grinding belt or
grinding wheel.
The workpiece gets hot during
grinding. Do not touch the machined
area, allow it to cool down. There is a
risk of burning. Do not use coolants
or the like.
If you are tired or have consumed
alcohol or tablets, do not work with
the device. Always have a break on
time.
Switch the device off and remove the
mains plug
−
to loosen a blocked insertion tool,
−
if the connection line is damaged
or entangled,
−
in case of unusual sounds.
Only use grinding wheel from original
supplier.
˜ Residual risks
Even if properly operating and handling
this electric tool, some residual risks
will remain. Due to its construction and
build, this electric tool may present the
following hazards:
Lung damage, if suitable respiratory
protection is not worn.
Hearing damage, if suitable ear
protection is not worn.
Damages to health due to
−
touching the area of the grinding
tool which was not covered;
−
the ejection of pieces from
workpiece or damaged grinding
wheels.
Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer
periods of time or if the unit is not
held or maintained properly.
WARNING!
m
Warning! During operation, this
u
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with
medical implants consult their
doctor and the manufacturer
of their medical implant before
operating the machine.
GB/IE
29
