Parkside PSS 65 D1 Gebruikershandleiding pagina 38
Beschikbare talen
Beschikbare talen
5. Switch the device on and move the
tool table
equally back and forth
[
6 ]
along the grinding wheel
6. Always use light pressure while
sharpening and slowly push the
blade towards the grinding wheel
7. Repeat the sharpening process until
all irregularities have been removed.
8. Switch the device off and wait for the
grinding wheel
NOTE
To sharpen a chisel, turn the chisel
u
over and repeat the process from
Point 5.
Sharpening knives
D ]
[
CAUTION!
m
Wear safety gloves when
handling knives and scissors.
NOTE
The device is not suitable for
u
grinding serrated knives.
1. Mount the selected sharpener (see
Mounting sharpener).
2. Turn the machine on.
3. Insert the blade of the knife right into
the grinding slot.
4. Using light pressing guide the blade
along the grinding wheel
evenly and slowly pull the knife
towards you.
5. Turn the knife and insert the knife
blade into the opposite grinding slot.
6. Repeat this grinding process for this
side of the blade as well.
7. Execute the alternating grinding
process until the cutting edge is
burr-free and sharp.
32 GB/IE
.
10 ]
[
10 ]
[
to stop.
10 ]
[
and
10 ]
[
8. Switch the device off and wait for the
grinding wheel
NOTE
Depending on the user preference,
u
.
the knife can also be ground using
the front grinding slot.
Sharpening scissors
E ]
[
NOTE
The device is not suitable for
u
grinding serrated scissors. The
device is not suitable for grinding
pinking shears.
1. Mount the selected sharpener
for knives and scissors
Mounting sharpener).
2. Completely open the scissors.
3. Turn the machine on.
4. Insert one of the scissor blades into
the grinding slot.
5. Using light pressure guide the blade
from the screw up to the tip along
the grinding wheel
6. Remove the scissors from the
sharpening station and turn the
scissors to sharpen the other blade.
7. Insert the other scissor blade into the
grinding slot.
8. Using light pressure guide the blade
from the screw up to the tip along
the grinding wheel
9. Execute the alternating grinding
process until the cutting edges are
burr-free and sharp.
10. Switch the device off and wait for the
grinding wheel
to stop.
10 ]
[
(see
1 ]
[
.
10 ]
[
.
10 ]
[
to stop.
10 ]
[
