Parkside PSS 65 D1 Gebruikershandleiding pagina 36
Beschikbare talen
Beschikbare talen
˜ Assembly
CAUTION! RISK OF INJURY!
m
Ensure that you have sufficient
u
space in which to work, and that
you do not endanger other people.
All covers and protective devices
u
must be assembled properly
before commissioning.
Disconnect the mains plug before
u
changing the setting on the device.
Setting up
Place the sharpening station on firm
surface and fasten the device. Ideally,
bolt the sharpening station to the
surface. Use the mounting holes for
the work bench assembly
baseplate for this.
NOTE
The screws and nuts required for
u
assembly are not part of the scope
of delivery.
Mount the sharpener
1. Select one of the three sharpeners.
2. In order to remove a sharpener
from the working position, you must
press down the release lever for the
sharpener
A ]
[
13 ]
[
3. Remove the sharpener from the
guide rails, upwards.
4. In the storage positions, the
sharpeners are not fixed to the
right and left side and can be easily
removed from the guide rails.
5. In order to fasten the selected
sharpener in the working position,
from above push this into the guide
rails. Press the sharpener down until
it snaps into place.
30 GB/IE
in the
A ]
[
9 ]
[
.
CAUTION!
m
The sharpeners also present a
u
safety device. Never use this
device without a sharpener. Risk
of injury!
˜ Operation
CAUTION! RISK OF INJURY!
m
Always disconnect the plug from
u
the mains socket before working.
Use only grinding disks and
u
accessories recommended by
the manufacturer. The use of
other insertion tools and other
accessories may cause risk of
injury.
Never operate the device without
u
the visual protection disk.
Switch on the equipment only
u
when it is safely installed on the
work surface.
CAUTION!
m
Despite spark protection,
always wear safety goggles
while working in order to
avoid eye injuries.
CAUTION!
m
We recommend wearing ear
protection to prevent damage
to hearing.
CAUTION!
m
Keep your hands away from the
u
grinding wheel and grinding belt
when the device is in operation.
Injury hazard.
