Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5 Quick start
Charge the battery completely before riding for
the first time. As required by transport law, the
battery leaves the factory with an approximately
30% charge. Charge temperature: 0°C to 45°C.
You can also remove the battery from your Pedelec
and charge it elsewhere. For more information,
refer to ➠ Chapter 6 "Battery".
1. Open the cover of the charging socket.
Opening the cover
2. Connect the plug of the charger to the battery.
Charging the battery
3. Plug the charger in at the wall socket.
4. Press the battery button. The battery is fully charged
when all the green LEDs on the battery are lit. Pull the
plug of the charger out of the charging socket, close
the cover and unplug the charger at the wall socket.
Battery information system
5. If you removed the battery for charging, replace it in
the battery holder.
Installing the battery
6. Now turn the key clockwise and remove it. The battery
is now locked in place.
Locking the battery
7. Make sure that the battery is securely positioned and
that the key is no longer in the lock.
Original User Manual | Groove 2.0
13
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
