Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will form
D
NORMAL MACHINE USE
D.1
Characteristics of personnel enabled to
operate on the appliance
The Customer must make sure the personnel for normal
appliance use are adequately trained and skilled in their duties.
The operator must:
• read and understand the manual;
• receive adequate training and instruction for their duties in
order to operate safely;
• receive specific training for correct appliance use.
IMPORTANT
The Customer must make sure his personnel have
understood the instructions received and in partic-
ular those regarding work hygiene and safety in use
of the appliance.
E
OPERATING
E.1
Description of the control panel
CONTINUOUS CYCLE BUTTON
1
It allows to activate/deactivate the Continuous
cycle
2
DEFROST CYCLE ACTIVATION ICON/BUTTON
F
INSTRUCTION FOR THE USER
F.1
Switching on the appliance
Connect the power cable to a power socket. The instrument
display performs a Lamp Test and for a few seconds the
display shows the compressor icon flashes, until the compres-
sor starts.
To activate and deactivate the appliance touch Program button
for 3 seconds to unlock the display
an integral part of the manual and therefore must be kept
together with it.
D.2
Basic requirements for appliance use
• Knowledge of the technology and specific experience in
operating the appliance.
• Adequate general basic education and technical knowledge
for reading and understanding the contents of the manual,
including correct interpretation of the drawings, signs and
pictograms.
• Sufficient technical knowledge for safely performing his
duties as specified in the manual.
• Knowledge of the regulations on work hygiene and safety.
3
COMPRESSOR ON SIGNALLING ICON
4
DISPLAY
5
UNIT OF MEASURE ℃/℉
TEMPERATURE BUTTON / UP ARROW
6
It allows to access the Set point and increase the
values.
PROGRAM BUTTON
Pressed briefly It allows to save value;
7
Pressed for 3 seconds it allows to unlock keypad
and enter programming mode.
ON-OFF BUTTON / DOWN ARROW for
decreasing the values.
8
14
It allows to activate-deactivate the appliance
9
ALARM SIGNALLING ICON
10
COMPARTMENT FANS ON SIGNALLING ICON
11
and then touch ON/OFF button
The display will show the message ON (for activation) or
alternately the message OFF and the compartment temper-
ature (for deactivation).
Even if the machine is deactivated with the ON/OFF button it
still remains powered.
10
;
Advertenties
Hoofdstukken
Inhoudsopgave
