Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
REPLACEMENT OF THE SEALING BAR TEFLON
Disconnect the equipment from the power network and wait for the bar to cool down.
Remove the sealing bar from the seating and disconnect the electrical terminals.
Remove the Teflon tape, clean the sealing bar with a cloth dipped in a detergent with nitre" and replace the
Teflon tape paying attention not to bend the wire of the sealing bar.
Re-connect the electrical terminals and re-install the sealing bar in the seating.
REPLACEMENT OF THE LID GASKET
When the lid gaskets looks spoiled or damaged it is good practice to replace it in order not to compromise
the efficiency and the speed of the machine.
After removing the old gasket replace the new one in the appropriate lid seating paying attention that the two
ends of the gasket are tightly joined together.
No gap should be left otherwise the vacuum will not be achieved.
Do not stretch the gasket when fitting-in into the appropriate lid seating.
WARNING
-
Get rid of the machine in a proper way following the national disposal rules.
-
Always protect the machine from the interventation of not authorized persons.
rev. 2 – 30/06/2010
All manuals and user guides at all-guides.com
12/13
Advertenties
Inhoudsopgave
