Download Inhoudsopgave Inhoud Print deze pagina

Control Terminal Blocks - Leroy Somer VARMECA 30 Installatie En Onderhoud

Verberg thumbnails Zie ook voor VARMECA 30:
Inhoudsopgave

Advertenties

LEROY-SOMER

3.2 - Control terminal blocks

• Check that the terminal block has been removed from its fixed holder (unplugged) before making any connections,
so as to avoid putting pressure on the card.
• The VARMECA has a positive logic configuration. Using a drive with a control system which has a different control logic
may cause unwanted starting of the motor.
• The control circuits in the drive are isolated from the power circuits by single insulation (IEC 664-1).
The installer must ensure that the external control circuits are isolated against any human contact.
• If the control circuits need to be connected to circuits conforming to SELV safety requirements, additional insulation must
be inserted to maintain the SELV classification.
Removable screw terminal block:
- Tightening torque = 0.3 N.m
- Max. cross-section = 1.5 mm
VMA
VMA
terminal
terminal
Designation
33/34
31/32
1
1
10V
2
2
aDI1
3
3
0V
4
4
aDI2
5
na
0V
16
InstallatIon anD maIntenance
VARMECA 30
Variable speed motor or geared motor
2
Function
+10V analogue internal source
analogue or logic
input 1
Assignment in standard
configuration: 0-10V speed
reference
logic circuit common 0V
analogue or logic
input 2
Assignment in standard
configuration: Motor PTC input
logic circuit common 0V
accuracy
maximum output current
Voltage input
Full scale voltage
Input impedance
current input
current range
Input impedance
Resolution
sampling
logic input (if connected to the +24V)
thresholds
Voltage range
load
Input threshold
Voltage input
Full scale voltage
Input impedance
current input
current range
Input impedance
Resolution
sampling
logic input (if connected to the +24V)
thresholds
Voltage range
load
Input threshold
Input (Ptc)
trip
cleared fault threshold
3776 en -
Characteristics
± 2%
30 ma
10 V ± 2%
95 kW
0 to 20 ma ± 5%
500 W
10 bits
6 ms
«0»: < 5 V – «1»: > 10 V
0 to +24 V
95 kW
7.5 V
10 V ± 2%
95 kW
0 to 20 ma ± 5%
500 W
10 bits
6 ms
«0»: < 5 V – «1»: > 10 V
0 to +24 V
95 kW
7.5 V
3300 W
< 1800 W
2013.06 / k

Advertenties

Inhoudsopgave
loading

Inhoudsopgave