Parkside PWBS 180 B2 Vertaling Van De Originele Gebruiksaanwijzing pagina 32
Beschikbare talen
Beschikbare talen
Operation
■
Tool direction of rotation!
Switching on
♦
To switch on the appliance, slide the On/Off
switch
forwards.
To lock the On/Off switch
switch
down at the front until it clicks
into place.
Switching off
♦
To switch off the power tool, let go of the On/
Off switch
. If it is locked, press the rear end
of the On/Off switch
Setting the rotational speed
Before starting work, set the speed to suit the appli-
cation. Use a low speed for coarse sanding;
increase the speed for fine sanding.
■
Adjust the speed by pressing the buttons
♦
Press the + button
♦
Press the – button
NOTE
►
The accessory tool rotates after switching off.
Wait until the accessory tool has come to a
standstill before putting down the appliance.
│
GB │ IE
■
28
All manuals and user guides at all-guides.com
, press the On/Off
and then release it.
.
to increase the speed.
to decrease the speed.
Maintenance and cleaning
WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work on the appliance.
■
The appliance is maintenance-free.
■
Do not use any sharp objects for cleaning
the appliance. Do not allow any liquids to get
into the appliance. The appliance could be
damaged.
■
Clean the appliance regularly, preferably imme-
diately after completion of the work.
■
Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners that can attack the
plastic.
■
Never obstruct the ventilation openings.
■
Remove any adhering swarf with a brush.
NOTE
►
Unlisted replacement parts (such as carbon
brushes, switch) can be ordered via our
service hotline.
Emptying the dust bag
To ensure optimum dust extraction, empty the dust
bag
regularly.
♦
Open the zip on the dust bag
♦
Shake out the dust bag
waste container.
Storage and handling of the
recommended accessory tools
■
Sanding tools are to be treated with care and
transported carefully.
■
Sanding tools should be stored in such a way
that they are not exposed to mechanical
damage or environmental influences (e.g.
damp).
.
over a suitable
PWBS 180 B2
