Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CLEANING AND MAINTENANCE
performing any work on
the equipment, pull the
Service
§ Only qualified specialist personnel and original
replacement parts should be used for repairs.
This will ensure that your device remains safe.
Cleaning
§ Regularly clean the machine housing with a
soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the dirt
does not come off use a soft cloth
moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
TECHNICAL DATA
CTC143LI1-BM
Voltage V
-1
No load speed min
Chuck capacity mm
Torque
Drilling capacity
in steel mm
wood mm
Battery
Battery capacity mAh
Charging duration battery h
Charger
Input: 100-240VAC -50 / 60Hz - 1.4A
Output: 17.5V - 1.5A
Weight kg
Attention! Before
power plug.
14.4
0-400/0-1500
10
17+1
10
22
LITHIUM
2000
1 h
1.12
CTC183LI1-BM & CTC183LI2-BM
Voltage V
-1
No load speed min
Chuck capacity mm
Torque
Drilling capacity
in steel mm
wood mm
Battery
Battery capacity mAh
Charging duration battery h
Charger
Input: 100-240VAC -50 / 60Hz - 1.4A
Output: 21.6V – 1.5A
Weight kg
Noise emission values measured according to
relevant standard.
Acoustic pressure level
L
85dB(A) K = 3 dB(A)
PA
Acoustic power level
L
96 dB(A) K = 3 dB(A)
WA
The sound power pressure
may exceed 85 dB(A), in this
case individual hearing
protection must be worn.
Weighted root mean square acceleration
according to relevant standard. :
K= 1,5 m/s ²
18
0-400/0-1500
10
17+1
10
22
LITHIUM
2000
1 h
1.12
ATTENTION !
Advertenties
Inhoudsopgave
