Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The declared vibration total value
has been measured in accordance with a
standard test method and may be used for
comparing one tool with another that the
declared vibration total value may also be
used in a preliminary assessment of
exposure.
A warning that the vibration
emission during actual use of the power tool
can differ from the declared total value
depending on the ways in which the tool is
used and of the need to identify safety
measures to protect the operator that are
based on an estimation of exposure in the
actual conditions of use (taking account of
all parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our
after-sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or his
agent to avoid a hazard.
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable
and secure position, in a cool and dry place,
avoid too high and too low temperatures.
_ Protect it from exposure to direct sunlight.
Keep it in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
Battery storage
_ Store your batteries in a cool area. Optimal
temperature for storing your Li-ion
battery for longer term is 2°C. (capacity loss wil l
only be 6% / year (compared to
20% at 25°C)). Never store batteries in
discharged condition.
_ It is better for Li-ion batteries to recharge them
frequently. Optimal long time
storage charge for your Li-ion battery is at 40%
of their capacity.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
replacement after
extended use, do not put it
in the domestic waste but
dispose of it in an
environmentally safe way.
BATTERIES
Unwanted batteries should be
disposed of in an
environmentally friendly way
and in conformance with the
local regulations.
Discharge the battery by
letting the machine run at no
load speed until the motor
Li-ion
Hand in the battery as
chemical waste with the
recycling station in your
Made in China
Batteries
stops.
municipality.
2017
Advertenties
Inhoudsopgave
