Installation Location; Repairs; Environmental Conditions; Power Supply - Medion ERAZER Spectator X50 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor ERAZER Spectator X50:
- Handleiding (40 pagina's) ,
- Gebruiksaanwijzing (15 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.2. Installation location
• Keep your monitor and all connected de-
vices away from moisture and avoid dust,
heat, direct sunlight and naked flames
(such as candles, for instance). Non-com-
pliance with these instructions can lead to
faults or damage to the monitor.
• This device is not suitable for use at work-
stations in line with the regulation for
computer workstations S 2.
• Do not use the device outdoors as it could
be damaged by weather such as rain,
snow etc.
• Avoid exposing the device to water drop-
lets or spray and do not place any liq-
uid-filled containers (vases or similar) on
or next to the device or the power pack.
Liquids penetrating the device may im-
pair the electrical safety of the product.
• The slots and openings on the monitor
are for ventilation purposes. Do not cover
these openings (risk of overheating, fire
hazard)!
• Position the cables so that no one can
tread on them or trip over them.
• Make sure that there is enough clearance
between the device and any surround-
ing furniture or walls. Ensure a minimum
clearance of 10 cm around the device for
sufficient ventilation.
• Place and operate all the components on
a stable, level and vibration-free surface in
order to prevent the monitor from falling.
4.3. Repairs
• Contact customer services if:
– the mains cable is burnt or damaged
– liquid has penetrated the monitor
– the monitor is not operating correctly
– the monitor has fallen or the housing is
damaged.
• Repairs to your monitor should only be
carried out by qualified specialists.
• If a repair must be carried out, please con-
tact only our authorised service partners.
4.4. Environmental conditions
• Only use the device in accordance with
the environmental conditions specified in
the technical data.
DANGER!
Risk of electric shock!
Major changes in temperature or fluctuati-
ons in humidity can cause moisture to build
up within the monitor due to condensation
– this can cause an electrical short circuit.
After transporting the monitor, wait until
it has reached ambient temperature befo-
re switching it on.
4.5. Power supply
DANGER!
Risk of electric shock!
Even when the device is switched off, some
components are live.
In order to disconnect the power to your
monitor or to completely isolate the de-
vice from voltage sources remove the
mains plug from the socket.
• Operate the monitor only from a 100 to
240 V~ 50 to 60 Hz earthed power socket
that is close by and easy to access.
• To disconnect the power supply from your
monitor, pull the plug from the socket.
DE
FR
NL
ES
IT
EN
7
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
