Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Maintenance
6.
Maintenance
6.1
Safety instructions for maintenance
D WARNING!
Hazard through a disregard of the maintenance
instructions!
This chapter contains important information for the safe
maintenance of the device.
☞ Read through this chapter carefully before carrying out
maintenance work on the device.
☞ Follow the safety instructions.
☞ Carry out the maintenance work as described.
y Repairs only by qualified specialist personnel.
D "1.2 Authorised target groups" (page 92).
y Electrical work only to be undertaken by qualified
electricians.
D "1.2 Authorised target groups" (page 92).
y Maintenance only by authorised users.
D "1.2 Authorised target groups" (page 92).
y No maintenance work permitted by children under
8 years old and persons who would not be able to
properly assess the hazards associated with handling the
device.
y When working at heights, ensure good stable footing
(e.g. stable stepladder).
y The hob and other parts that can be touched must be
cooled down.
y Never open the fan housing.
6.2
Maintenance
6.2.1
Replacing filter filling
Odours are trapped in the filter filling in the recirculated air
filter. The odour-free, cleaned room air is fed back into the
room.
Recirculated air filters are maintenance-free for up to two
years. Then filter filling must be replaced at regular intervals.
Maintenance intervals
y Daily use: With odours in the exhaust air or after
12 months at the latest.
y Occasional use: With odours in the exhaust air or after
24 months at the latest.
108
All manuals and user guides at all-guides.com
D ATTENTION!
Danger of property damage through falling parts!
When working on the device, parts of the device or tools
could fall and damage the kitchen equipment.
☞ Protect the cooled hob and other surfaces in the cooking
area (e.g. with thick cardboard).
☞ Remove the two screws.
☞ Remove the cover.
☞ Remove the filter to the top.
The replacement of the filter filling is carried out as
described in the associated instructions.
☞ Change the filter filling.
☞ Clean the filter from the outside (e.g. through extraction
with a vacuum cleaner).
☞ Insert the filer again.
D "3.4.8 Insert inside parts" (page 102).
6003417_a – 26.09.2017
Advertenties
Hoofdstukken
Inhoudsopgave
