Maintenance Instructions - Bestway Lay-Z-Spa Gebruikershandleiding
Verberg thumbnails
Zie ook voor LAY-Z-SPA:
- Gebruikershandleiding ,
- Handleiding (340 pagina's) ,
- Handleiding (25 pagina's)
Inhoudsopgave
Beschikbare talen
Beschikbare talen
USAGE INSTRUCTIONS
HEATING TIMES
For the water to reach 40°C (104°F), the time required is based on the starting water temperature and
outdoor temperature. The data below is purely for reference.
To display the current water temperature, run the filter system for at least a minute.
Outdoor Temperature
10ºC (50ºF)
15ºC (59ºF)
20ºC (68ºF)
25ºC (77ºF)
30ºC (86ºF)
MAINTENANCE INSTRUCTIONS
Ensure the pump is unplugged before conducting any hot tub maintenance.
LINER
• It is normal for your hot tub liner to appear as if it is losing air due to variations in ambient temperature
that may change the internal air pressure in the liner. Follow the assembly instructions and inflate to the
accurate pressure, when needed.
COVER
• The inside and outside of the cover should be cleaned periodically by using a gentle detergent for the
PVC material.
FILTER CARTRIDGE
• To optimize the performance of the filtration system, check and clean your filter cartridge every day.
• We recommend changing your filter cartridge every week or replacing it if after washing, the filter
cartridge remains soiled and discolored.
WATER
Many pollutants settle below the water line. These pollutants can cause bacterial, algal or fungal growth.
After a while, tenacious stains or biofilms may develop on the accessible surfaces below the water line. It
is recommended to clean your hot tub as regularly as needed.
• To keep your water clean, run the filtration system and perform chemical maintenance every day. The
filtration system eliminates the debris in the water and the chemical maintenance sanitizes the water.
NOTE: When performing the chemical maintenance, use the chemical dispenser with tablets only
(do not use granules). Don't throw chemical products (tablets, granules or liquid) directly in the water;
the chemicals will settle on the bottom of the hot tub, damage the material and discolor the PVC.
• Water quality will be directly related to frequency of use, number of users and overall maintenance of
the hot tub. The water should be changed every 3 days if there is no chemical treatment being
performed. It is highly recommended to use tap water to fill the hot tub to minimize the influence of
unwanted pollutants, such as minerals.
• We recommend taking a shower before using your hot tub, as cosmetic products, lotions and other
residues on the skin can quickly degrade water quality.
Water Temperature
10ºC (50ºF)
15ºC (59ºF)
20ºC (68ºF)
25ºC (77ºF)
30ºC (86ºF)
15
Set Temperature
40ºC (104ºF)
40ºC (104ºF)
40ºC (104ºF)
40ºC (104ºF)
40ºC (104ºF)
Heating Time
16-24 hours
12-20 hours
10-18 hours
8-12 hours
5-8 hours
Inhoudsopgave
