Repairing - Bestway Lay-Z-Spa Gebruikershandleiding
Verberg thumbnails
Zie ook voor LAY-Z-SPA:
- Gebruikershandleiding ,
- Handleiding (340 pagina's) ,
- Handleiding (16 pagina's)
Inhoudsopgave
Beschikbare talen
Beschikbare talen
DISASSEMBLY & STORAGE INSTRUCTIONS
REPAIRING
When repairing the cover or interior floor:
Use the provided repair patch to repair tears or punctures.
• Clean the area, and carefully peel the patch.
• Stick the patch over the damaged area.
• Wait 30 seconds before re-inflation.
When repairing the walls or exterior floor:
Use the provided repair patch and glue (not included) to repair tears or punctures.
• Clean and dry the area to be repaired.
• Cut the provided patch to the appropriate size. DO NOT peel the patch.
• Use glue (not included) to coat one side of the newly cut patch. Make sure the glue is evenly
distributed. Wait for 30 seconds and then place the patch with glue over the damaged area.
• Smooth out any trapped air bubbles and press down firmly for two minutes.
• Wait 30 minutes before re-inflation.
STORAGE
It is not necessary to remove the hot tub heater from the liner before storage.
• Remove all accessories and make sure the hot tub liner, inflatable cover and accessories are
completely clean and dry before storing. If the hot tub is not completely dry, mold may form and
damage the hot tub liner during the storage period.
• Fold the hot tub liner only if the ambient temperature is above 15ºC (59ºF) to ensure pliability.
• Store the hot tub in a dry place with a moderate temperature between 15ºC (59ºF) and 38ºC (100ºF).
• We strongly recommend positioning the hot tub liner and inflatable cover inside a carton box to better
protect the material during the winter months.
ATTENTION: Please ensure the bottom of the hot tub heater is not positioned on the liner during
long-term storage to prevent potential liner damage.
17
Inhoudsopgave
