Sennheiser EM 3732 Command Gebruiksaanwijzing pagina 59
Inhoudsopgave
Low Batt
AF
COM
AF
COM
All manuals and user guides at all-guides.com
Transmitter battery status display
The 6-step transmitter battery status display
the transmitter's remaining battery/accupack capacity:
Number of segments
(Low Batt)
Note:
If no battery/accupack status signal is received, the battery status
display is not shown.
When the battery/accupack is almost empty, text "Low Batt" flashes in
alternation with the status display. In addition, the warning triangle for
indicating error states
Command display (status display of the audio outputs AF and COM)
The command display is only available with the EM 3732 Command twin
receiver.
Besides the two audio outputs
receiver also features two command outputs
Via the "Command" menu, you can configure the receiver so that – with
the command button of the transmitter pressed – the audio signal is
available at only one of the outputs or at both (see "Configuring the audio
outputs of the EM 3732 Command twin receiver" on page 32).
The command display
mitter's audio signal is available.
When "AF" lights up brightly, the audio signal is available at the audio
K
M
output
or
.
If the "AF" symbol does not appear, the audio signal is
K
M
audio output
or
When "COM" lights up brightly, the audio signal is available at the
J
command output
or
If the "COM" symbol does not appear, the audio signal is
J
command output
or
º
provides information on
Capacity
Accupack
Battery
approx. 100 %
full
approx. 80 %
-
approx. 60 %
half-full
approx. 40 %
-
approx. 20 %
-
approx. 0 %
almost empty
5
lights up red.
K
M
and
, the EM 3732 Command twin
J
and
¾
shows the audio output at which the trans-
.
L
.
L
.
Indications and displays
L
.
not
issued on the
not
issued on the
11
Hoofdstukken
Inhoudsopgave
