Sennheiser EM 3732 Command Gebruiksaanwijzing pagina 83
Inhoudsopgave
Scan reset
Channel list
Scan new
Scan reset
Bank 1 2 3
Free 43 40 42
Bank 4 5 6 U
Free 32 31 33 60
save
DEV
790.800
M
H
z
sync
03.03
BANK
AF
COM
esc
CH
All manuals and user guides at all-guides.com
Releasing channels that are used or subject to interference
After the scan, the channels that are occupied or subject to interference
are marked with a warning triangle and the text
"Tune" menu. Via the
The last scan result is deleted.
7
Turn the jog dial
Press the jog dial
The number of free channels is reset to the maximum for all frequency
banks.
7
Turn the jog dial
Press the
save
button
The selected frequency bank is automatically called up in the "B.Ch"
digital audio
processing
menu.
sync
Multi-channel operation
Combined with Sennheiser 3000 and 5000 series transmitters, the
receivers can form transmission links that are suitable for multi-channel
operation.
CAUTION!
Risk of reception interference!
If – within the receiver's frequency range – transmitters
transmit on channels from different frequency banks, reception
can be subject to interference and inter-modulation. Only the
factory-preset frequencies within the frequency banks "1" to
"6" are interference and inter-modulation free.
Set all transmitters of a multi-channel system to different
channels within the same frequency bank.
Before putting the transmission links into operation, we recommend that
you perform a scan in order to find a frequency bank with a sufficient
number of free channels:
Switch all transmitters off.
Use a receiver to scan all frequency banks for free channels (see
"Scanning the frequency banks for interference-free channels" on
page 33).
Select a frequency bank with a sufficient number of free channels (see
"Selecting a frequency bank and a channel" on page 28).
Set each transmitter/receiver pair in your multi-channel system to a
different free channel within this frequency bank.
"Scan
reset" menu, you can unmark these channels.
until the arrow points to
"Scan
7
.
to select a frequency bank.
8
.
The operating menu
"Freq.
occupied" in the
reset".
35
Hoofdstukken
Inhoudsopgave
