Inhoudsopgave
Advertenties
Screen displaying the
information from Baby
unit no. 1 ("Out of
range" alert activated)
8. The receiver is equipped with a vibrator function. Set the start/stop switch (11) to the vibrator position; the vibrator
icon appears on the screen
reaches a certain intensity. This function is useful when the parents are in a very noisy environment (e.g.:
vacuum-cleaner noise). To save energy it is recommended not to use the vibrator function too often.
9. If you select "On" on both appliances the "Out of range" alert is set off as soon as the receiver is no longer in
range of the transmitter for more than 30 seconds. The LED sound level indicator (16) as well as the "Out of
range" alert icon start to flash to warn you. The temperature is no longer displayed as well and the symbol
appears. The alert stops as soon as the receiver is back within range of the transmitter. If you are using two
transmitters the information concerning the transmitter of which you are out of range stays displayed on the
screen throughout the alert.
N.B. The alert is also set off when the transmitter is off, when the batteries are exhausted, when it has no power
supply, or when the configuration of the alert is not identical on both appliances.
10. As soon as the ambient temperature exceeds the upper or lower temperature limits defined an alarm is set
off. Depending on the limit that has been exceeded the icon
start to flash on the receiver screen.
11. It is possible to control the nightlight (6) remotely from the receiver: the start/stop switch (1) needs to be
set to
.
Keep button (15) down while pressing button (12) as many times as is necessary to switch off (OFF);
continuously switch on (ON) the nightlight or set it to VOX mode. The corresponding icons are then displayed
on both appliances' screens. Note the receiver can only control the nightlight of the transmitter of which the
number is displayed on the screen at the moment you press the button (15).
12. The parents have the possibility of being able to answer their child to quieten him. Keep the button (15) down;
the transmission icon
speaking release the button (15). Note that parents can talk to their child whenever they like - even during a
transmission. The receiver transmits your voice to the transmitter of which the number is displayed on the screen
at the moment you press the button (15).
13. The status of the lithium battery is shown by the charge status indicator
down the indictor segments go out progressively. Once empty the latter starts flashing and an alarm is set
off to remind you to recharge the battery with the mains adapter.
14. A beep sounds every time you press a button; it means the appliance has taken your action into account.
All manuals and user guides at all-guides.com
. The vibrator starts functioning when the sound level of the child's voice
appears on the receiver screen. Talk in the microphone (17). Once you have finished
BABYPHONE PREMIUM CARE • Instruction manual
Screen displaying the
information from Baby unit
no. 2 ("Out of range" alert
inactivated and nightlight
set to VOX)
(max) or
(min) as well as the temperature
. As the battery charge goes
19
Advertenties
Inhoudsopgave
