Miele Complete C3 Electro Gebruiksaanwijzing pagina 40
Beschikbare talen
Beschikbare talen
en
The Standby indicator light in the
display and the LED on the Comfort
handle both light up yellow.
Using for the first time (dia. 19 + 20)
Pressing the - button will directly select
the lowest setting, pressing the + but‐
ton the highest setting will be selected.
After that the vacuum cleaner will
switch on at the setting which was used
previously.
To do this, press the Standby button
on the Comfort handle.
To regulate the suction power
(dia. 19)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to ma‐
noeuvre the floorhead.
The vacuum cleaner has symbols on
the Comfort handle which indicate the
type of use the settings are suitable for.
The selected power level will light up
yellow.
Curtains, fabric
Upholstery, cushions
Deep pile carpets, rugs and run‐
ners
Energy-saving vacuuming. This
setting is also very quiet
Loop pile carpet and rugs
Hard flooring and heavily soiled
carpets and rugs
40
All manuals and user guides at all-guides.com
When using the Electrobrush / floor‐
head, if the suction seems too high,
reduce the suction until the Electro‐
brush / floorhead is easier to manoeu‐
vre.
Press the + button on the Comfort
Press the - button on the Comfort
During vacuuming
When vacuuming, pull the cleaner
Switching the Electrobrush on and
off (dia. 22)
To use the Electrobrush, this must be
switched on additionally to the vacuum
cleaner.
To do this, press the On/Off button
The LED on the Comfort handle will
light up.
handle to select a higher suction
power level.
handle to select a lower suction
power level.
behind you on its wheels. You can
stand it upright for vacuuming stairs
and curtains etc.
When vacuuming fine dust, e.g.
sawdust, sand, plaster, flour, talcum
powder etc., electrostatic charges
build up naturally. Under certain con‐
ditions these charges will be re‐
leased. To avoid the unpleasant ef‐
fects of these discharges, a metal in‐
lay has been incorporated into the
underside of the handle. Please
make sure that you keep your hand
in constant contact with this metal
strip during vacuuming (dia. 21).
on the Comfort handle.
