Miele Complete C3 Electro Gebruiksaanwijzing pagina 45
Beschikbare talen
Beschikbare talen
time these items are replaced. The vac‐
uum cleaner must be switched off to do
this.
Press the reset button.
The maintenance indicator will go out
and reset to zero.
The indicator can only be reset by
pressing the reset button after the
light has come on. Pressing the but‐
ton at any other time will have no ef‐
fect.
When to change the thread lifters
The thread lifters on the suction inlet to
the floorhead can be replaced. Check
them from time to time and replace
them if the pile has worn down.
How to replace the thread lifters
(dia. 33)
Use a suitable screwdriver to remove
the thread lifters from the slots.
Fit new thread lifters.
Replacement parts are available from
your Miele Dealer or from Miele (see
end of booklet for contact details).
Cleaning and care
Always disconnect the vacuum
cleaner from the electrical supply be‐
fore cleaning it. Switch off at the wall
socket and unplug it.
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac‐
cessories can be cleaned with a propri‐
etary cleaner suitable for plastic.
All manuals and user guides at all-guides.com
Dust compartment
The dust compartment can, if necessa‐
ry, be cleaned using a dry duster, brush
or, if available, a second vacuum clean‐
er to vacuum the dust out.
Do not use abrasive cleaning
agents, glass cleaning agents, all-
purpose cleaners or oil-based condi‐
tioning agents.
Do not let the vacuum cleaner
get wet. If moisture gets into the ap‐
pliance, there is a risk of electric
shock.
en
45
