GB
IE
NI
Inserting the battery
1. Push the battery (4) along the
guide into the battery holder (5).
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release
(32) on the battery (4).
2. Pull the battery out of the battery
holder (5).
Switching on and off
Switching on
You can regulate the stroke rate con-
tinuously with the on/off switch. The
more you press the on/off switch, the
higher the stroke rate.
1. Insert the rechargeable battery (4)
into the device.
2. Press the switch lock (1).
3. Press the On/Off switch (2).
The LED work light (22) lights up.
4. Release the switch lock (1).
Switching off
1. To turn it off, release the on/off
switch (2).
2. Do not pull the sawblade out
of the cut until it has come to a
standstill.
3. Remove the rechargeable battery
(4) from the device if you are leav-
ing the device unattended or if you
have finished working.
Transport
Notes
• Turn off the device.
• Make sure that all moving parts
have come to a complete stop.
• Remove the rechargeable battery.
• Remove the attachment tool.
• Always carry the device by the
handle (3).
16
Cleaning,
maintenance and
storage
WARNING! Risk of injury due to
unintentional start-up. Protect your-
self when performing maintenance or
cleaning work. Switch off the device
and remove the battery (4).
You should have any repair and main-
tenance work that is not described in
these instructions carried out by our
Service Centre. Only use original re-
placement parts.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemic-
al substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
• Keep the ventilation slits, motor
housing and handles of the ma-
chine clean. Use a damp cloth or
brush to do this.
Maintenance
The device is maintenance free.
Storage
Always store the device and ac-
cessories:
• clean
• dry
• protected against dust
• In the case provided (33)
• out of the reach of children
Devices with battery:
• The storage temperature for the
battery and device is between 0 °C
and 45 °C. Avoid extreme cold
or heat during storage to ensure
the battery output is not adversely
affected.