Preparing The Appliance For Operation; Preparing Oreshki - Unold 48360 Gebruiksaanwijzing
Inhoudsopgave
Beschikbare talen
Beschikbare talen
Copyright UNOLD AG | www.unold.de
PREPARING THE APPLIANCE FOR OPERATION
1.
Remove all packaging materials and any transport guards and stickers (not
the type plate or the serial number!). Keep the packaging material away from
children. Choke hazard! Dispose of the packaging material according to the
applicable statutory waste disposal regulations.
2.
Inspect the appliance for damage. If there is visible damage, do not operate
the appliance; instead, contact our customer service department.
3.
Before using the appliance for the first time, we recommend that you wipe
off the two non-stick baking surfaces with a damp cloth.
4.
Open the window during the burn-in phase that now follows.
5.
Close the appliance, plug the mains plug of the appliance into an electrical
outlet (230 V~, 50/60 Hz). The red operating indicator light is illuminated
and shows that the heating circuit is in operation.
6.
Heat up the appliance for approx. 10 minutes.
7.
After pre-heating the appliance there may already be visible traces of use;
however, these do not affect the function of the appliance and do not
constitute grounds for a complaint.
8.
Before using the oreshki maker for the first time, lightly grease both baking
surfaces with a brush with a heat-resistant shortening, such as margarine.
Because the baking surfaces of the appliance have a non-stick coating, they
must only be greased prior to making the first oreshki, thereafter greasing is
no longer required.
9.
If a mild odour becomes perceptible after heating up your new appliance for
the first time, it is completely harmless.
Caution: We always recommend that you not eat the very first oreshki
prepared in the appliance; dispose of them. For each subsequent use of the
appliance, naturally this is no longer necessary!
PREPARING ORESHKI
1.
First prepare the oreshki dough as described in the „Recipes" section.
2.
Close the appliance, plug the mains plug of the appliance into an electrical
outlet (230 V~, 50/60 Hz). The red operating indicator light is illuminated
and shows that the heating circuit is in operation.
3.
Wait until the indicator light is off. This takes approx. 3 to 8 minutes. Note
concerning the baking signal light: When the light is off, this means that the
proper temperature has again been reached, however it does not mean that
Stand 12.4.2024
DE
EN
FR
NL
IT
ES
PL
RU
RU
17 von 72
Inhoudsopgave
