Bosch Climate 7000i Bedieningsinstructies pagina 46
Beschikbare talen
Beschikbare talen
Operation
3.4.2
Matter compatibility
This air conditioner is designed to be compatible with the Matter
protocol, ensuring seamless integration with Alexa, Google Assistance,
Apple Home or other Matter-enabled devices, for enhanced
interoperability and connectivity with your smart home ecosystem.
Supported features include:
▶ Turn On-Off device
▶ Set operating mode (Cooling, Heating, Dry, Fan, Auto)
▶ Monitor room temperature
▶ Set room temperature
▶ Set fan speed
The features available may vary based on your Matter-enabled device
type.
For specific instructions on connecting and using other Matter-
compatible devices, consult the respective owner's manuals or
documentation provided with those devices.
3.5
Setting main operating mode
Switching on/off the unit
▶ Press the K key to switch the unit on or off:
The unit starts in the set operating mode.
Settings can also be selected when the unit is switched off. The unit
saves the settings, and also retains them in the event of a power failure.
After turning off, the unit remains in standby mode. Intelligent on-off
technology enables an automatic energy-saving mode when on standby
mode (1 W standby).
Automatic mode
In automatic mode, the unit automatically switches between heating and
cooling mode to maintain the desired temperature.
▶ Press the
key repeatedly until
▶ Select the required temperature with the . and / keys.
The fan speed cannot be adjusted in automatic mode.
Cooling mode
▶ Press the
key repeatedly until
▶ Select the required temperature with the . and / keys.
▶ Press the
key until the required air speed is reached.
Fan mode
▶ Press the
key repeatedly until
▶ Press the
key until the required fan speed is reached.
The temperature cannot be adjusted or displayed in fan mode.
Dry mode
▶ Press the
key repeatedly until
▶ Select the required temperature with the . and / keys.
Change humidity percentage to maintain the minimum desired humidity
level during dry mode:
▶ Press the
key repeatedly until %RH appears on the display.
▶ Confirm with the Ok key.
46
appears on the display.
appears on the display.
appears on the display.
appears on the display.
▶ Press the . and / keys until the desired relative humidity
percentage is shown. The setting range is 35 % - 85 % in 5 % steps.
The set humidity is shown in the display of the remote control.
This function is not designed to increase humidity. It is specifically
intended for dehumidification.
The fan speed cannot be adjusted or displayed in Dry mode.
Heating mode
▶ Press the
key repeatedly until
▶ Set the required temperature with the . and / keys.
▶ Press the
key until the required fan speed is reached.
If the outside temperature is very low, the heating capacity of the air
conditioning system may not be sufficient. We recommend connecting
additional heat sources.
3.6
Setting timer
ON and OFF timers can be set to between 0 and 24 hours, in 30-minute
increments for the first 10 hours, then in 1-hour increments. If 0 hours
is set, the timer is cancelled.
Setting the on timer
▶ Press the
key until the
▶ Press the . or / key to set the desired time.
The setting is applied shortly afterwards.
Setting the off timer
▶ Press the
key until the
▶ Press the . or / key to set the desired time.
The setting is applied shortly afterwards.
Cancelling timer
▶ Press the
key to select the corresponding timer.
▶ Set 0.0 hours.
The timer is cancelled after a short time.
Combining timers
The two timers can be set at the same time. Either timer can be
programmed to activate prior to the other
▶ Set the on timer and off timer.
The settings will be automatically combined.
Current time
Setting of ON timer
Setting of OFF timer
Switch-on time
Switch-off time
Table 8 Example
You can not program the on timer and off timer to operate the unit at
different temperatures or with other settings.
3.7
Primary operating functions
3.7.1
Energy saving function
The following energy saving function can be selected at the device:
Save+
The unit automatically reduces consumption of energy, while
maintaining the desired room temperature.
Climate 7000i – 6721873544 (2024/02)
appears on the display.
symbol appears.
symbol appears.
13:00 o'clock
4.0 h
8.5 h
17:00 o'clock
21:30 o'clock
