VEVOR YCS-90 Handleiding pagina 5
Stoomgenerator
2. Technical Information of YCS Steam Generator (Form 2 ):
Model
Controllable
Time(minutes)
TC-03
2-60
2.0 Installation and Operation of TC-03 Control Panel
Slightly touching the POWER button starts the generator's operation,
touching that button again, stops the generator's operation and the
indicating light turns off. The presetting heating time of the machine is 60
minutes.If it works over 60 minutes,the operation will stop automatically.
2.1.Position
Outside Steam Room The height of 1.2m is recommended to install the
Control Panel.A hole with 38mm's diameter in the wallis needed to install
for the Control Panel.The connection cable should go through the joint's
protective cover in case of being buried in the wall.(Figure 2 )
After installation and inspection of Control Panel,start the machine.
Controllable temperature
（35-55℃ is suggested）
35-55℃
4
Specification(L*W*H)
170*110*55mm
