Parkside PMSHM2 A3 Bedienings- En Veiligheidsinstructies pagina 18
Verberg thumbnails
Zie ook voor PMSHM2 A3:
- Bedienings- en veiligheidsinstructies (75 pagina's) ,
- Bedienings- en veiligheidsinstructies (127 pagina's) ,
- Bedienings- en veiligheidsinstructies (181 pagina's)
Beschikbare talen
Beschikbare talen
and a long beeping tone sounds or can't
search any object in the wall. Move and
hold the product several centimeters
further to the right or left of the previous
surface and recalibrate. Start the search
process.
Repeat several times to ensure the
detection accuracy.
Incorrect measurements can occur de-
pending on the nature of the examined
wall. Check therefore before every
measurement the position of a known
wooden or metal beam, of a known void
or a known power line. If these are not
detected by the product, the substrate is
not suitable for a search with this product.
Avoid touching the LC display during
measurements as it may affect the accu-
racy of the product.
Please note that power lines can also be
located as metal or as beams. Always use
the additional voltage search, so that you
can exclude any incorrect interpretations.
Please note that metal beams are also
detected in the Wooden beam search
"STUD" function. If you find a beam and
you want to be sure that it is not a metal
beam (or for example a water pipe), use
the additional Metal search "METAL".
Depending on the wall thickness and
material, it is possible that the product
may signal a finding, before it is over the
material. In this case mark the start and
end of the signalled area at the indentation
of the measuring head. The middle of
the sought object lies in the middle
between the two markings.
18 GB/IE/NI
