Milwaukee MW306 MAX Handleiding pagina 33
Ec / tds / nacl / temperatuur draagbare meter
9.4. WARNINGS & MESSAGES
Messages Displayed During Calibration
If an EC calibration is performed, the %NaCl calibration is
automatically cleared. A new %NaCl calibration is required.
If the reading exceeds expected calibration standard,
"WRONG STANDARD" message is displayed and calibration
can not be confirmed. Check if the correct calibration
solution has been used and / or clean the probe. See PROBE
MAINTENANCE section for details.
If the temperature is outside the 0.0 to 60.0 °C range, "WRONG
STANDARD TEMPERATURE" message is displayed. Temperature
value is displayed blinking.
Messages Displayed During Measurement
If the salinity measurement exceeds the specified limits or the
temperature exceeds (-20 to 120°C), "OUT OF SPEC" message
is displayed.
SALINITY 33
