Parkside PMSHM2 A3 Bedienings- En Veiligheidsinstructies pagina 17
Verberg thumbnails
Zie ook voor PMSHM2 A3:
- Bedienings- en veiligheidsinstructies (127 pagina's) ,
- Bedienings- en veiligheidsinstructies (106 pagina's) ,
- Bedienings- en veiligheidsinstructies (181 pagina's)
Inhoudsopgave
Beschikbare talen
Beschikbare talen
or a known power line. If these are not detected
by the product, the substrate is not suitable for a
search with this product.
Avoid touching the LC display during measure-
ments as it may affect the accuracy of the product.
Please note that power lines can also be located
as metal or as beams. Always use the additional
voltage search, so that you can exclude any in-
correct interpretations.
Please note that metal beams are also detected
in the Wooden beam search "STUD" function. If
you find a beam and you want to be sure that it
is not a metal beam (or for example a water pipe),
use the additional Metal search "METAL".
Depending on the wall thickness and material, it
is possible that the product may signal a finding,
before it is over the material. In this case mark
the start and end of the signalled area at the in-
dentation of the measuring head. The middle of
the sought object lies in the middle between the
two markings.
Please note that metal objects are located more
readily the easier they can be magnetized. This
means that iron is detected at a significantly
greater distance than copper for example.
Please note that power lines can only be detected
as such, if they are carrying voltage. Light switches
must always therefore be switched on, so that
the conductor is carrying voltage. All the fuses
must similarly be inserted or switched on.
Please note that only voltages of 230 V∼ 50 Hz
are detected.
If the display of the product hang-up or the
product doesn't work well, open the battery
compartment cover
from the battery compartment
the RESET button
and remove the battery
10
using a sharp object. Then
8
. Now press
9
GB/IE/NI
17
Hoofdstukken
Inhoudsopgave
