TechniSat VIOLA 2 Handleiding pagina 23
>
[Scanning...] appears on the display.
During the scan a progress bar and the number of stations found is displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 4.3.3 / 2.2.1).
6.2.2 Selecting stations
>
To select a DAB+ station, press the Tune + or Tune - buttons and confirm the
station selection with Enter.
6.2.3 Signal intensity
>
Briefly press the Info/Menu button repeatedly until the signal intensity is shown
on the display by way of a bar chart.
Minimum signal intensity
44
BDA_Viola_2.indd 44-45
Current signal intensity
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal. Align the telescopic antenna as
described in Section 4.3.3 if required.
6.2.4 Manual setting
This menu item is used to check the reception channels and can be used to position the
antenna.
>
Hold down the Info/Menu button, use the Tune + or Tune - buttons to select the
[Manual setting] item and press the Enter button.
>
Select a channel (5A to 13F) using the Tune + or Tune - and Enter buttons. The
signal intensity will now be shown on the display. If a DAB+ station is being
received on a channel, the station ensemble name is displayed.
Stations with a signal intensity below the required minimum signal intensity are
not transmitting a strong enough signal.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
45
16/05/2018 13:41
