TechniSat VIOLA 2 Handleiding pagina 27
8 System settings
All the settings referred to under this item are equally applicable in DAB+ and FM mode.
8.1 Time and date settings
8.1.1 Manually setting the time/date
Depending on the setting for time updates (section 8.1.2), the time and date have to be
set manually.
>
Hold down the Info/Menu button and use the Tune + or Tune - buttons to select
the [System] item.
>
Press the Enter button.
>
Using the Tune + or Tune - buttons, select the [Time] item and press Enter.
>
Using the Tune + or Tune - buttons, select the [Set time/date] item and press
Enter.
52
BDA_Viola_2.indd 52-53
>
The first time digits (hours) flash and can be changed using the Tune + or Tune -
buttons.
The Tune + increases the value, the Tune - button reduces the value.
>
Press Enter to confirm the setting.
>
The next time digits (minutes) start to flash and can again be changed as
described above.
>
Press Enter after every other setting in order to go to the next setting.
>
To set the date, proceed in the same way as described above.
>
After all settings have been done and the Enter button pressed, [Time Saved]
appears on the display.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
53
16/05/2018 13:41
