TechniSat VIOLA 2 Handleiding pagina 31
>
[Restart...] appears on the display while the device is on standby. After switching
on the device, the digital radio automatically performs a complete scan in DAB
mode. While scanning, the display information shows the progress, as well as the
number of digital radio stations detected. After completing the station scan the
first DAB+ channel is played.
8.5 Software version
Under SW version you can retrieve the currently installed software version.
>
Hold down the Info/Menu button and use the Tune + or Tune - buttons to select
the [System] item.
>
Press the Enter button.
>
Using the Tune + or Tune - buttons, select the [SW version] item and press
Enter.
>
The current software version is displayed.
60
BDA_Viola_2.indd 60-61
9 Cleaning
To prevent the risk of an electric shock, you may not clean the device using a
wet cloth or under running water. Prior to cleaning, pull out the mains plug and
switch off the device.
You may not use scouring pads, scouring powder and solvents such as alcohol or
petrol.
Do not use any of the following substances: salt water, insecticides, chlorine or
acid-based solvents (ammonium chloride).
Clean the housing using a soft, moist cloth. Do not use spirit, thinners, etc.; you
could damage the surface of the device.
Only clean the display with a soft, cotton cloth. If required, use a cotton cloth with
small amounts of non-alkaline, diluted, water or alcohol-based soap solution.
Gently clean the surface using the cotton cloth.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
61
16/05/2018 13:41
