Inventum IOM6035GT Handleiding pagina 26
Inbouwoven multifunctioneel
Beschikbare talen
Beschikbare talen
Careful:
Do not cover the openings between the kitchen furniture and the top side of the appliance. The openings are
required for ventilation.
Note:
It is possible to connect the appliance to the power supply before it is placed.
Procedure:
1.
Place the appliance (A) in the middle of the kitchen furniture.
Careful:
Make sure there a space of at least 2 mm between the appliance and
the walls of the kitchen furniture.
2. Open the door (E) of the appliance.
3. Place the appliance in the kitchen furniture.
4. Place the caps (B).
5. Attach the appliance to the kitchen furniture.
Use the screws (D).
6. Place the covers (C).
7. Close the door.
8. Connect the appliance. See section Connecting the appliance.
CONNECTING THE APPLIANCE
1. Check that the voltage in your home corresponds to the voltage of the appliance.
2. Check that the electrical system in your home has been provided with a 16 A fuse.
3. Use the provided power cord to connect the appliance to the socket.
After connecting, the clock shows '00.00' and a sound signal can be heard.
REPLACING THE POWER CORD
If necessary you can replace the power cord supplied with a longer or different cord.
Warning:
Have this cord replaced by a qualified electrician.
Note:
Check that the new power cord has a core diameter of at least
1.5 mm
and a length of 1 m. When using a power cord
2
that is too short, you will be unable to connect the appliance first,
place it in the kitchen furniture and then connect it to the socket.
1. Find the connection housing on the back of the appliance.
2. Carefully press the pins (B) in to open the cover (A).
Use a screwdriver for this.
3. Remove the screws (C).
4. Fit the new power cord (D) in the connection housing.
5. Connect the wires according to the wiring diagram.
6. Insert the screws.
7. Close the cover.
26
•
English
A
B
C
D
E
D C A B
L
N
P
