Roborock Saros Z70 Gebruiksaanwijzing pagina 17

Verberg thumbnails Zie ook voor Saros Z70:

Beschikbare talen

Issue

Unable to start auto-drying

Unable to auto-empty

Unable to wash the mop cloths

with hot water

The mop cloth is unable to extend

The side brush is unable to extend

Solution

• Auto-drying is disabled. Check in-app settings.

• If the robot departs the dock during drying, the drying will end in advance.

• In a humid environment, it is recommended to extend the drying duration in the app to

improve the drying performance.

• Auto-emptying is disabled. Check in-app settings.

• Dock dust container cover is not installed. Check and install.

• Auto-emptying will not be triggered if the robot returns to the dock without cleaning.

• The robot will not auto-empty after returning to the dock in DND mode. Adjust the cleaning

time or DND period, or start emptying manually.

• Auto-emptying will not be triggered if the robot is moved to the dock manually. Start emptying

manually.

• The mop cloths will not be washed if not used.

• If the robot does not start from the dock or no dock is found on the app map, it will not return

to the dock for mop washing.

• Check clean water tank placement or refill the tank as required.

• Check dirty water tank placement or empty the tank as required.

• Check that the cleaning tray module and cleaning tray filter have been correctly installed.

• Check that Washing Water Temperature is set to Hot Water in the app.

• Check that the FlexiArm Design Extended Mopping feature is enabled in the app.

• The mop cloth will only extend along walls and certain obstacles.

• Check if the mop extension structure is stuck.

• Check that the FlexiArm Design Extended Cleaning feature is enabled in the app.

• The side brush does not extend for every corner or every time when the robot cleans along the

wall.

• Check whether the side brush is jammed.

017