DeWalt DCH481 Handleiding pagina 28
EngLIsH
HEAVY‑DUTY CORDLESS ROTARY HAMMER
DCH481
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
No‑load speed
No‑load impact rate
Single impact energy (EPTA 05/2009)
Maximum drilling range in concrete
Optimum drilling range in concrete
Maximum core drilling range in concrete
Tool Holder
Collar diameter
Battery Type
Weight (without battery pack)
Noise and vibration total values (triax vector sum) according to
EN IEC 62841‑2‑6:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
26
WALT one of the
e
V
DC
min
‑1
bpm
J
mm
mm
mm
SDS‑max®
mm
kg
dB(A)
dB(A)
dB(A)
=
m/s²
m/s²
=
m/s²
m/s²
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
DCH481
54
Rotary Hammer
2
DCH481
540
D
WALT declares that these products described under
e
Technical Data are in compliance with:
3150
2006/42/EC, EN62841‑1:2015 +A11:2022,
6.1
EN IEC 62841‑2‑6:2020 +A11:2020.
40
These products also comply with Directive 2014/30/EU and
16–30
2011/65/EU. For more information, please contact D
45‑100
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
76
Li‑Ion
5.4
Markus Rompel
Vice‑President Engineering, PTE‑Europav
98
D
WALT, Richard‑Klinger‑Straße 11,
e
106
65510, Idstein, Germany
05.06.2024
3
WARNING: To reduce the risk of injury, read the
instruction manual.
9.1
Definitions: Safety Guidelines
1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
8.1
these symbols.
1.5
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e
