Balboa TP600 Programmeerhandleiding pagina 36
Standaard menu's
Beschikbare talen
Beschikbare talen
Adjusting Filtration
Main Filtration
Filter cycles are set using a start time and a duration. Start time is indicated by an "A" or "P" in the bottom right corner
of the display. Duration has no "A" or "P" indication. Each setting can be adjusted in 15-minute increments. The panel
calculates the end time and displays it automatically.
Sub-Menu Detail – Set Filter Cycle 1
Main Screen
To next item in
Main Menu
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
It is possible to overlap Filter Cycle 1 and Filter
Cycle 2, which will shorten overall filtration by the
overlap amount.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370,6590188, 6976052, 6965815,
7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright
of Balboa Water Group.
While the Temperature is
still flashing, press Light
repeatedly until FLTR 1
appears in the LCD.
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
To Set
To Set
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
To Set
Purge Cycles
In order to maintain sanitary conditions, secondary Pumps
and/or a Blower will purge water from their respective plumbing
by running briefly at the beginning of each filter cycle.
If Filter Cycle 1 is set for 24 hours, enabling Filter Cycle 2 will
initiate a purge when Filter Cycle 2 is programmed to begin.
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time that keeps the last change to a menu item.
*****
Waiting time (depends on menu item) that reverts to original setting
and ignores any change to that menu item.
Sets start hour
Selects minutes
Sets Filter 1 length in hours
Selects part of an hour
To Set
*****
Waiting a few seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
Main Screen
Waiting
a few seconds
reverts to original setting
*****
To Set
Sets start hour
Selects minutes
Sets Filter 1 length in hours
Selects part of an hour
To Set
*****
Waiting a few seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
Sets 15-minute increments
Waiting
a few seconds
reverts to original setting
*****
Sets 15-minute increments
Wait to
Revert
*****
Main Screen
Sets 15-minute increments
Waiting
a few seconds
reverts to original setting
*****
Sets 15-minute increments
Wait to
Revert
*****
Main Screen
35
