DAB ngpanel Instructies Voor Installatie En Onderhoud pagina 33
Beschikbare talen
Beschikbare talen
Consumption and statistics
A description of each individual page follows.
To view the function provided by every single page, press key
to navigate backwards to the main menu.
Error and Alarm Log
Warning
It detects a malfunction in the system or
pumps, but this does not prevent operation.
(E.g. Overflow)
Pump status
Pump exchange mode
ENGLISH
Device configuration
. Once you reach the last section of a menu page, use the key
The alarm log is easily accessible in the list of pages in the main menu, immediately
above the "Overview" menu page. This page shows the event history starting with the
most recent one recorded by the system.
In the event of system and/or pump problems, check the information pop-up on the
display and follow the step-by-step instructions.
The system provides a total of three types of alerts, in order of importance:
Error
It detects a malfunction that prevents the
system or pumps from operating
normally.
(E.g. Overcurrent)
Pop-up Warnings and Alarms
From the list of events it is possible to view their description.
This allows you to understand the cause and the next action to be taken to remedy the
fault.
The same section Error and Alarm Log, offers the possibility of resetting the list of errors
recorded up to that moment. This operation requires confirmation in order to continue.
The screen shows the operating status of the pumps in the system.
When you access the menu page, the following options are shown:
-
Manual Control: press and hold the key
key
to activate pump 2, press and hold the key
-
Pump exclusion: it is possible to indicate from this screen which pumps to enable
or disable, allowing the system to manage their activation autonomously.
Pump exchange mode
One of the following intervals can be set:
-
At restart
-
Every 2 hours
-
Every 4 hours
-
Every 8 hours
-
Every 12 hours
The choice of exchange mode is necessary to prevent wear of a single
pump.
57
System
Danger
It detects a critical issue in the system or
pumps, which blocks their normal
operation. In this condition it is suggested
not to touch the devices and to contact
Customer Service.
to activate pump 1, press and hold the
to activate both pumps.
-
Every 16 hours
-
Every 20 hours
-
Every 24 hours
-
Never
