Parkside PAP 20 B1 Vertaling Van De Originele Gebruiksaanwijzing pagina 31
Verberg thumbnails
Zie ook voor PAP 20 B1:
- Bedienings- en veiligheidsinstructies (271 pagina's) ,
- Bedienings- en veiligheidsinstructies (330 pagina's) ,
- Bedienings- en veiligheidsinstructies (286 pagina's)
Beschikbare talen
Beschikbare talen
battery is displayed by illumi-
nating the 3-colour LED lights of
the state of charge display.
3 LEDs light up (red, orange
and green): Battery is fully
charged.
2 LEDs light up (red and or-
ange): Battery has a residual
charge.
1 LED lights up (red):
Battery has to be charged
Only charge the battery
(4) when the red LED on
the charge status indicator (3)
is on.
Recharging the battery
Allow a hot battery to
cool before charging.
Only charge the battery
(4) when the red LED on
the charge status indicator is on.
1. Remove the battery (4) from
the appliance, as necessary
(see „Removing/inserting
the battery").
2. Insert the battery (4) in the
charging compartment of
the battery charger (5).
3. Plug the battery charger (5)
into a mains outlet.
4. When the battery is fully
recharged unplug the battery
charger (5) from the mains.
5. Remove the battery (4) from
the charger (5).
Overview of the control dis-
play (6) on the charger (5):
Green LED lights up without bat-
tery inserted: Charger ready.
Green LED lights up:
Battery such alleged charged.
Red LED lights up:
Battery charging.
Red LED fl ashes:
Battery overheated
Red + green LEDs fl ash:
Defective battery
Used batteries
• If a fully recharged battery
lasts for considerably shorter
operating times, the battery
is used up and needs to be
replaced. Only use an OEM
GB
IE
31
