Parkside PAP 20 B1 Vertaling Van De Originele Gebruiksaanwijzing pagina 32
Verberg thumbnails
Zie ook voor PAP 20 B1:
- Bedienings- en veiligheidsinstructies (271 pagina's) ,
- Bedienings- en veiligheidsinstructies (330 pagina's) ,
- Bedienings- en veiligheidsinstructies (286 pagina's)
Beschikbare talen
Beschikbare talen
GB
IE
battery pack replacement
available from our Customer
Service.
• Always take heed of the ap-
plicable safety instructions
as well as the environmental
protection regulations and
information (see "Cleaning
and Maintenance").
Wall mounted charger
(optional)
You can also mount the charger
(5) on the wall.
• Using dowels, place two
screws 76,2 mm apart at
the desired position of a
wall.
• The screw head can have a
diameter of 7 - 9 mm
• Leave the screw heads
protruding at a distance of
approx. 10 mm from the
wall.
• With the openings of the
wall bracket, you can attach
the charger (5) to the two
screws and pull the charger
down until it stops.
32
When drilling, be care-
ful not to damage any
supply lines. Use suitable
search devices to fi nd these or
consult an in-stallation plan
for guidance. Contact with
electrical cables can lead to
electric shock and fi re.
Contact with a gas pipe can
result in an explosion. Dama-
ge to a water pipe can lead to
property damage and electric
shock.
Storage
• Remove the battery before
storing the unit for longer
periods of time (e.g. hiber-
nation).
• Store the battery only in a
partially charged state. Du-
ring prolonged storage, 2 to
3 LEDs should be illuminated.
• During a longer storage
period, check the state of
charge of the battery and
recharge if necessary roug-
hly every 3 months.
• In order to keep the battery
well charged, avoid expo-
