Seca 665 Handleiding pagina 21
Beschikbare talen
Beschikbare talen
Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lbs).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the
kg/lbs/sts key.
The kg or lbs display lights up.
Automatic switch-off/economy mode
The scale automatically detects whether it is being operated on rechargeable batteries
alone or whether it is connected to the mains.
– With rechargeable battery operation: automatic shut-down after 5 minutes.
– With mains operation: shut-down only via keypad.
Taring weight display (TARE)
The Tare function is very useful if an additional weight, e.g. that of a wheelchair, is to be
ignored for weighing purposes.
Proceed as follows:
– Press the green Start key.
– First place the additional weight (e.g.
the wheelchair) on the scale and acti-
vate the Tare function by pressing and
holding the HOLD/TARE key.
The display is reset to zero.
the display. The note "NET" appears. You
can now perform as many weighing oper-
ations as you like.
– Now move the patient and the wheel-
chair previously weighed onto the
scale.
The scale determines the patient's weight.
The Tare function can be re-activated at
any time with an altered weight or without
a weight.
– Put the new weight on the scale and
depress and hold the HOLD/TARE
key.
– The Tare weight is erased when the
scale is turned off.
Model 665
0. 0
appears in
21
GB
