Switching Off; Transport; Cleaning, Maintenance And Storage; Cleaning - Parkside Pmsa 20-Li A1 Vertaling Van De Originele Gebruiksaanwijzing
Inhoudsopgave
Beschikbare talen
Beschikbare talen
GB
IE
NI
4. Guide the sanding disc against the
workpiece.
Switching off
1. Remove the sanding disc from the
workpiece.
2. Move the On/Off switch (3) back to
the "0" (OFF) position.
3. Wait until the power tool has stopped
before placing it down.
4. Remove the rechargeable battery (7)
from the device if you are leaving the
device unattended or if you have fin-
ished working.
Transport
Information on transporting the device:
• Switch off the device and remove the
battery (7). Make sure that all moving
parts have come to a complete stop.
• Remove the attachment tool.
• Always carry the device by the handle
(4).
Cleaning, maintenance
and storage
WARNING! Risk of injury due to un-
intentional start-up. Protect yourself when
performing maintenance or cleaning work.
Switch off the device and remove the bat-
tery (7).
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.
16
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemical sub-
stances may attack the plastic parts of the
machine. Do not use any cleaning agents
or solvents.
• Keep the ventilation slits, motor housing
and handles of the machine clean. Use
a damp cloth or brush to do this.
• Before you store the device: Empty the
dust collection box (5) and clean the fil-
ter bag (21), Opening and emptying
the dust collection box, p. 14.
• Clean the sanding sheet with a vacuum
cleaner or knock it out.
Maintenance
The device is maintenance free.
Storage
Always store the device and accessories:
• clean
• dry
• protected against dust
• In the case provided (9)
• out of the reach of children
The storage temperature for the re-
chargeable battery and the device is
between 0 °C and 45 °C. Avoid extreme
cold or heat during storage to ensure the
battery output is not adversely affected.
Remove the rechargeable battery from the
device before storing the device (see the
separate operating instructions for the bat-
tery and charger).
Hoofdstukken
Inhoudsopgave
