Inhoudsopgave
Advertenties
Please note:
The fan runs independently of the temperature setting.
Switch on the device (see Putting into operation).
Press the temperature button
temperature.
Press the plus button
Press the minus button
(between 18 and 45°C)
After setting the desired temperature, press the OK
button
or simply wait for 5 seconds without
5
making any entries.
Please note:
You can cancel the input any time by pressing the
Cancel button
.
6
TIMER SETTING
The purpose of the timer is to automatically
turn off the ceramic fan heater.
With the aid of the timer, you can select the turn-off time
in hour increments. Then the wall-mounted ceramic fan
heater will switch off automatically.
Please note: As long as a weekly timer is activated,
the turn-off timer cannot be used. (See Chapter "De-
activation of the Week Timer)
Turn the device ON (see Starting). Press the timer but-
ton
repeatedly until you reach the desired number
4
of hours.
Example: If the device should automatically switch off
after 4 hours, press the timer button
„4H" on the display. Wait about 5 seconds. The in-
formation is automatically transferred. Then the device
will be automatically turned off in 4 hours. If you want
to make sure that the timer entry has been transferred,
press the timer button
4
entry will appear in the display.
By repeatedly pressing the timer button
be adjusted in 1-hour increments:
0H – 1H – 2H – 3H – 4H – 5H – 6H – 7H – 8H
36
GB/IE/NI
once to adjust the
10
to increase the temperature.
8
to reduce the temperature
7
until you see
4
once more. Then '4H' or your
the timer will
4
OSCILLATION FUNCTION
To turn the device oscillation function on
or off, press the oscillation button
the oscillation function is enabled suc-
cessfully, it will be shown on the display.
The oscillation function means that the
blown air is distributed from the top to
the bottom.
HEATING STEP ADJUSTMENT
By pressing the heating level button
you can adjust the desired heating level.
By each pressing the button, you will
switch to the next heating level. Depen-
ding on the selected heating level, you will
see the respective value on the display.
Press 1x: 1 heating level (1000 W)
Press 2x: 2 heating level (2000 W)
Press 3x: Fan
SYSTEM TIME SETTING
Prior to use the week timer first time, set the current time:
Please note: If necessary, the ceramic wall fan heater
must be disconnected from the power supply before the
system time settings can be adjusted.
1. Select the first heating level. The left symbol lights up
on the display
A
Chapter Heating Level Setting.
2. Press the shown week timer button
3. Then the week day is shown on the display (see
the table). By pressing the plus
button, select the current day of the week:
01. Monday
02. Tuesday
03. Wednesday 04. Thursday
05. Friday
06. Saturday
07. Sunday
. If
2
,
11
. For details, refer to
:
9
or minus
8
7
Advertenties
Hoofdstukken
Inhoudsopgave
