Download Inhoudsopgave Inhoud Print deze pagina

Installation Instructions; General; Safety Instructions For The Installation - Atag HI6271S Handleiding

Inhoudsopgave

Advertenties

INSTALLATION INSTRUCTIONS

Safety instructions for the installation

Clearance
*
HI1271S: min. 110 cm
HI6271S: min. 65 cm
HI7271S: min. 78 cm
HI8271S: min. 80 cm
HI9271S: min. 90 cm
Th e connection must comply with national and local regulations.
Th e appliance must always be earthed.
Th is appliance may only be connected by a competent electrical
installer.
For the connection, use an approved cable (for example type
HO7RR) in accordance with the regulations. Th e cable casing
should be of rubber.
The connection cable must hang freely and is not to be fed
through a drawer.
If you want to make a fi xed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fi tted in
the supply line.
Th e worktop the hob is built into must be fl at.
Th e walls and the worktop surrounding the appliance must be
heat resistant up to at least 85 °C. Even though the appliance
itself does not get hot, the heat of the hot pan could discolour or
deform the wall.
Damage caused by incorrect connection, installation or use, will
not be covered by the guarantee.
Suffi cient all-round clearance is essential to the safe use of the hob.
Check that there is enough clearance.
cabinet
GB 33
cooker hood
hob

General

side wall

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Hi1271sHi7271sHi8271s hi9271s

Inhoudsopgave