Atag HI311M Gebruiksaanwijzing pagina 42
Beschikbare talen
Beschikbare talen
operation
switching on
residual-heat indicator
The indicator shows that the cooking zone is still hot and
goes out as soon as the glass top reaches a safe
temperature.
Residual heat is shown in the display with an H.
residual-heat indicator
fast-cook setting
You will normally bring food to the boil on a high setting and
then switch to a lower setting to allow it to cook through.
The fast-cook setting can do this for you. The fast-cook
setting automatically switches the hob down to the setting
selected for cooking through.
fast-cook setting
switched on
After a while, you will notice that you always let potatoes, for
example, cook through on the same setting - setting 4, for
example. In that case, select fast-cook setting A4 and the
appliance will automatically switch down to setting 4 as soon
as the food boils.
The fast-cook setting can be used in combination with the
timer. Take care, however, that you increase the cooking time
by the fast-cook time (see also the 'timer' section on
page 10).
attention
A condition for using this setting is that you use a good
quality pan with a heavy base.
When cooking small quantities, the fast-cook setting may be
too fierce. In that case, do not use the fast-cook setting.
GB 8
switching on
1
Put a pan on the cooking zone.
2
Press the on/off button.
A horizontal line (-) appears in the display.
on/off switch
3
Press quick-selector button 12.
12 appears in the display.
4
Press the + button.
A1 appears in the display. If the button is pressed again,
the next setting appears. You can choose from 9 settings
quick-selector
(see table).
As long as there is the letter A in the display – A3, for
button 12
example – a high power level is being used for fast
cooking.
If there is only a number – 3, for example – the cook-
+ button
through setting has been switched on.
In the table below, you can see the fast-cook times for the
various fast-cook settings. The number after the A indicates
the setting used for cooking through. On fast-cook setting
A6, for example, the food is fast-cooked at a high power level
fast-cook setting
for the first ten minutes and then cooked through on
switched on
setting 6.
setting
fast-cook time
A1
1,5 minutes
A2
2 minutes
A3
3 minutes
A4
4 minutes
A5
6 minutes
A6
10 minutes
A7
13 minutes
operation
switching on
setting
searing time
A8
2 minutes
A9
2,5 minutes
GB 9
