Download Print deze pagina

Parkside PWD 25 C4 Vertaling Van De Originele Gebruiksaanwijzing pagina 25

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 56
signs of damage or wear
and tear. If the cord is
damaged during use, it
must be disconnected
from the supply network
immediately. DO NOT
TOUCH THE CABLE BE-
FORE IT HAS BEEN DIS-
CONNECTED FROM THE
POWER SUPPLY. Do not
use the device if the cord
is damaged or worn.
Ensure that the mains
voltage and mains fre-
quency match the spe-
cifications on the rating
plate. Adaptation to the
various mains frequen-
cies is automatic.
Connect the device only
to a power outlet with
a residual current cir-
cuit breaker (FI switch) of
rated residual current no
more than 30 mA.
Connect the appliance to
a power outlet with a fuse
of at least 16 A.
If the power cord of this
device is damaged, it
must be replaced by the
manufacturer, their cus-
tomer service or by a
similarly qualified per-
son in order to avoid haz-
ards. contact the service
centre.
Make sure before use
that the appliance is
properly assembled and
that the filters are in the
correct position. Nev-
er perform vacuuming
without a filter. The appli-
ance could become dam-
aged.
Never use the device
if there are children or
animals nearby. People
nearby must wear pro-
tective clothing.
Operation
Pay attention, be aware
of what you are doing
and take the utmost care
when working with the
device. Do not use the
device if you are tired or
you are under the influ-
ence of drugs, alcohol or
medication.
Do not allow the vacuum
to come into contact with
people or animals.
While in operation, never
aim the suction hose and
nozzles at yourself or oth-
er people; particularly not
eyes or ears. There is a
risk of injury.
GB
MT
25
loading

Deze handleiding is ook geschikt voor:

458741 2401